hohner |
Hohner Automation Ltd. |
Home | About Us | Products | Barriers | Distributors | Custom | News |
PTS-001 'Pit Bull' - Hook Load / Dead Line Sensor |
|
Part Number: PTS - 001
4...20 mA 2 wire current loop output Zone 0 Ex ia IIC Certified For up to 2.5" Cables Can measure any range MS6 Connector Standard
Certified to ATEX, IECEx and CSA
Photo shows unit attached to 1.25" cable. Different inserts, magnetically attached to torque pin are used for different cable diameters.
A 3/4" Hex ratchet is provided and locked into place, though if it does go missing, any 3/4" Hex wrench will do the job.
hundreds of legacy sensors replaced with success |
Technical Data | Connection Options | ||
Operating temp: | - 40..+60 degrees C | MS6, MS7, MS10 and others | |
- 40..+140 degrees F | + Loop | Pin A | |
- Optional | -40....+ 85 degrees C | - Loop | Pin D |
-40... +185 degrees F | |||
Certification: | ATEX, IECEx, UKCA | - Other connector types also available | |
Weight: | 22 lbs (10 kg) | ||
Protection: | IP 66 / X7 M | Installation | |
Load Cell: | Stainless Steel |
Installed on the deadline side |
|
Material Chassis: | Aluminum |
Output is linearly proportional to tension on |
|
Material Clamp: | Stainless Steel | deadline | |
Power Supply: | 24 V | For 0.75” to 2.5” cable diameters | |
Output Tolerance: | 0.25% of full scale | Output Limits (always linear) | |
Calibration Error: | Under 5% | At min weight, the output is 4mA (point set by user) | |
Temp Effects: | Full shift 0.035%/10C | At max weight, the output is 20mA (point set be user) | |
![]() |
|||
Advantages | |||
-Easy MS6, MS7 or MS10 connection | |||
-Easy to use clamp on design | |||
-Fully interchangeable with existing units |
|||
-Field replaceable load cell, in the event | |||
of a failure, only the actual load cell is | |||
replaced | |||
Certification |
|||
ATEX | |||
IECEx | |||
UKCA |
Installation Manual:
Hook load sensor installation manual
Dimensions:
Hohner Corp. | Tel: 1 905 563 4924 and 1 800 295 5693 |
5536 Regional Road 81 | Fax: 1 905 563 7209 |
Beamsville, Ontario, L0R 1B3, Canada | E-mail: hohner@hohner.com |
Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 and 0 845 658 2020 |
Units 14-16, Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
Wrexham, North Wales, LL13 8UG, UK | E-mail: uksales@hohner.com |